Our Industries
Related Products
-
Read moreQuick ViewUltrasonic Flowmeter TTFM100-F1-NG
The Transit Time Flow Meter TTFM100-F1-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.•Clamp-on sensors: it is not necessary to stop the flow to install them; Wetted sensors.•AC and DC supply: 85..264 VAC and 24 VDC.•The time difference during the measuring process could be 0.2 ns.•Analog (4-20 ma), pulses (relays), frequence, Pulse (OCT) and RS485 (M-BUS, MODBUS )outputs.•All the measures could be driven to the RS485 in order to save data into a PC remotely transmitted by telemetry.Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter TFM4100W
Ultrasonic Flowmeter TFM4100W measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter / Calorimeter TFM2100-NG
Ultrasonic Flowmeter / Calorimeter TFM2100-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe. This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.Clamp-on sensors: it is not necessary to stop the flow to install them; Wetted sensors.
Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter/Calorimeter TFM3100 – F1
The Transit Time Flow Meter TFM3100 measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.High accuracy measuring: Linearity: better than 0.5% Repeatability: better than 0.2%, Accuracy: better than ± 1%Wide measuring range: Several types of transducers to be selected, measuring pipe sizes from DN15mm to DN6000mm with four different types of sensors + PT100 ohm when it works as heat meter.Italian or English menu: The different versions of TTFM100/2009 NEW GENERATION can support Italian or English display, easy to operate, in the near future other languages will be implemented.Power supply: 8….36 VDC or 10….30VACEngineering Units: Flow: Imperial and metric – Calories: BTU; GJ; KW; KCalDimensions / Protection Grade: 90 90 36mm / IP20Set-Up: By integrated keypadOutput: Relay OCT/4-20mA/RS485Protocol: M-BUS, MODBUSRead moreQuick View -
Read moreQuick ViewUltrasonic Transit Time Flowmeter AFLO-TT
AFLO-TT Ultrasonic Transit Time Flowmeter is ideal to measure flow rate of clear, non-aerated fluids in full pipes. Works best on fluids that have less than 2% particulate or gas bubbles
- User-Friendly Operating System
- Works from the Outside of Common Pipe Materials
- Works with Wide Range of Liquids
- Wide Measuring Ranges Up to DN6000
- Easy and Fast Mounting
Read moreQuick View -
Read moreQuick ViewDoppler Ultrasonic Flowmeter DFM 5.0
- User-Friendly Calibration
- Password Protected
- Isolated 4-20mA Output
- 2 Control Relays
- Digital Signal Processing
- Optional Intrinsic Safety
Read moreQuick View
