-
Read moreQuick ViewDoppler Flow Meter 6.1
- Enhanced Performance
- Easy to Install and Configure
- Non-Contacting Clamp-On Ultrasonic Sensor
- Works on a Large Variety of Pipe Materials and Sizes
- Large Back-lit Flow Rate Display and Totalizer
- Isolated 4-20mA Output
- 2 Programmable Control Relays
- Optional MODBUS® RTU or HART Output
- 128MB Data Logger (26 million points)
Read moreQuick View -
Read moreQuick ViewFlow Monitor Fixed Installation For Pipe Flow Monitoring
- Provides power for FlowPulse 22-28 V DC and Universal AC 85-264 V
- Display for flow/velocity from a single FlowPulse controller
- Set up of FlowPulse sensor
- Two programmable relays for control and alarm
- Daily system/resettable totalizers
- Logging, set up, and download via optional Log Software
Read moreQuick View -
Read moreQuick ViewFlowPulse Sensor- Non-invasive Clamp on Flow sensor
- Non-invasive
- Minimal installation costs
- Range of options available
- Simple Installation
- Flexible PC software
- Compatible with a wide range of pipe material
Read moreQuick View -
Read moreQuick ViewPulsarGuard Series
- Non-invasive and maintenance-free
- Simple bolt-on installation
- Low cost
- No moving parts and vibration resistant
- IP68 Stainless Steel housing
- Highly reliable in low or high temperature
- ATEX Flammable atmosphere approved (2011 option only)
Read moreQuick View -
Read moreQuick ViewTransit Time Ultrasonic Flow Meter TTFM 6.1
- Three easy-to-select transducer options covering 15 mm to 1,200 mm nominal pipe diameters.
- Transducers work on all common pipe materials.
- Standard mounting hardware makes novice installers look like experts.
- Transducers don’t contact the pipe. There’s no wear and tear, and no shutdown to install.
- Easy-to-contact and knowledgeable staff is here to help you before, during, and after installation.
- Analog, pulse, and serial communication options to meet your specific application needs.
- Standard 26 million point data logger and free Logging Software make data management and reporting fast and easy.
- All transducers are approved for use in hazardous locations.
Read moreQuick View -
Read moreQuick ViewUltra 5
Non-Contacting Level and Pump Control and Flow Measurement
- 5 control relays
- Measurement range 125 mm to 40 m (5 in to 131 ft)
- Optional 4-20mA input
- Pre-programmed tank shapes
- Power run-on
- Pump Exercising
- Start point variation | Storm Control | Aeration control | Flush valve Control | Differential level control
Read moreQuick View -
Read moreQuick ViewUltrasonic Transit Time Flowmeter AFLO-TT
AFLO-TT Ultrasonic Transit Time Flowmeter is ideal to measure flow rate of clear, non-aerated fluids in full pipes. Works best on fluids that have less than 2% particulate or gas bubbles
- User-Friendly Operating System
- Works from the Outside of Common Pipe Materials
- Works with Wide Range of Liquids
- Wide Measuring Ranges Up to DN6000
- Easy and Fast Mounting
Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter / Calorimeter TFM2100-NG
Ultrasonic Flowmeter / Calorimeter TFM2100-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe. This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.Clamp-on sensors: it is not necessary to stop the flow to install them; Wetted sensors.
Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter/Calorimeter TFM3100 – F1
The Transit Time Flow Meter TFM3100 measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.High accuracy measuring: Linearity: better than 0.5% Repeatability: better than 0.2%, Accuracy: better than ± 1%Wide measuring range: Several types of transducers to be selected, measuring pipe sizes from DN15mm to DN6000mm with four different types of sensors + PT100 ohm when it works as heat meter.Italian or English menu: The different versions of TTFM100/2009 NEW GENERATION can support Italian or English display, easy to operate, in the near future other languages will be implemented.Power supply: 8….36 VDC or 10….30VACEngineering Units: Flow: Imperial and metric – Calories: BTU; GJ; KW; KCalDimensions / Protection Grade: 90 90 36mm / IP20Set-Up: By integrated keypadOutput: Relay OCT/4-20mA/RS485Protocol: M-BUS, MODBUSRead moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter TFM4100W
Ultrasonic Flowmeter TFM4100W measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter TFM5100-NG
The Transit Time Flow Meter TFM5100-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter TTFM100-F1-NG
The Transit Time Flow Meter TTFM100-F1-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.•Clamp-on sensors: it is not necessary to stop the flow to install them; Wetted sensors.•AC and DC supply: 85..264 VAC and 24 VDC.•The time difference during the measuring process could be 0.2 ns.•Analog (4-20 ma), pulses (relays), frequence, Pulse (OCT) and RS485 (M-BUS, MODBUS )outputs.•All the measures could be driven to the RS485 in order to save data into a PC remotely transmitted by telemetry.Read moreQuick View
+90 505 057 73 00 |info@debikontrol.com
