Bend Packers OP
Bend packers thanks to their construction are suitable for repairing in bend parts of pipelines at an angle from 45°to 90°.
- Description
- Reviews (0)
- Brochure
- User’s Guide
Product Description
Bend packers thanks to their construction are suitable for repairing in bend parts of pipelines at an angle from 45° to 90°. This construction and excellent rubber material of packers ensure, that the repaire part is plain and without bumps.
Be the first to review “Bend Packers OP”
Technical Document
Safety Instruction Manual
Related Products
-
Read moreQuick ViewDifferential Level Transmitter DLT2.0
Measures Level, Differential Level and Open Channel Flow
Two Non-Contacting Ultrasonic Sensors
Large White Backlit LCD Display
Three Isolated 4-20mA Outputs
Built-in 5-Key Calibration
2 Programmable Control Relays
Optional 2 Million Point Data Logger
Optional Intrinsically Safe SensorsRead moreQuick View -
Read moreQuick ViewMantaRay Portable Area-Velocity Flow Meter
- Measures flow in partially filled pipes and open channels
- No flume or weir required
- 4-20mA and Relay outputs for connection to Samplers and SCADA
- Powered with built-in rechargeable NiMH batteries
- 2 million point data logger with USB output to Flash drives
- Backlit LCD display for flow rate, totalizer and menu system
Read moreQuick View -
Read moreQuick ViewMechanical Flow Meter Small Serie
Read moreQuick View -
Read moreQuick ViewMechanical Flow Meter Large Serie
A scaled dial and mechanical indicator continuously monitor the flow rate at any given time whilst electrical switches can be specified to signal when a particular level has been reached during increasing or decreasing flow rates. 3″ 0-1500 LPM 4″ 0-2000 LPM 6″ 0-3500 LPM 8″ 0-5000 LPM
Read moreQuick View -
Read moreQuick ViewArea-Velocity Flow Monitor AVFM 5.0
- For Open Channels and Pipes No Flume or Weir Required
- Ultrasonic – Measures Velocity + Level to Calculate Flow
- Works in partially filled and surcharged pipes
- 3 Isolated 4-20mA Outputs(Flow, Level and Velocity)
- Isolated 4-20mA/0-5V Output
- Totalizer and 2 Control Relays
- Optional Intrinsically Safe Sensor
Optional built-in 2-million point Data Logger
Read moreQuick View -
Read moreQuick ViewPortable Ultrasonic Transit Time Flow Meter TFM 1100P
- Backlit LCD Display
- Simple –16 key Calibration
- Built-in data-logger
- High accuracy measuring
- Wide measuring range from DN15 to DN6000
- RS-232 serial interface
Read moreQuick View -
Read moreQuick ViewFlanged Ultrasonic Water Meter TFM6000-WF
Sandwich Insertion Ultrasonic Water Meter is a new style water meter specially designed for agricultural irrigation, Garden Management and water resource supervision.
Advantages of this water meter ;
Low cost, high accuracy, low power consumption, stability and reliability.
1 inch thickness of the meter helps to save installation space, and parts to achieve IP 68, enable the water works in any severe environment .
Due to unique design, there will be no pressure loss and different water medium will have no influence on measurement
Analog, Digital outputs and RS485
Read moreQuick View -
Read moreQuick ViewUltrasonic Slurry Flowmeter SFM 6.1
- Optimized for Slurries
- Easy, Intuitive Set-Up
- 5 Button Menu System
- Isolated 4-20mA Output
- Up to 6 Control Relays
- Optional Built In Data Logger
Read moreQuick View -
Read moreQuick ViewDoppler Flow Switch DFS 5.1
- Flow Control from the Outside of Metal or Plastic Pipes
- 5 amp DPDT Control Relay
- Adjustable ON/OFF Set-Points
- Hi or Lo Flow Alarm Mode
- Adjustable Time Delay
- Relay Status LED
- Flow Rate LED bargraph
Read moreQuick View -
Read moreQuick ViewDoppler Ultrasonic Flowmeter DFM 5.0
- User-Friendly Calibration
- Password Protected
- Isolated 4-20mA Output
- 2 Control Relays
- Digital Signal Processing
- Optional Intrinsic Safety
Read moreQuick View
Reviews
There are no reviews yet.