-
Read moreQuick ViewHalfround Pipe Stoppers UR
These pipe stoppers are due to their lenght suitable for sealing of hause connections and domestic pipe systems.
Read moreQuick View -
Read moreQuick ViewCone Pipe Stoppers ULK
Cone pipe stoppers have in comparison with classical pipe stoppers different construction, but their use is the same.
Read moreQuick View -
Read moreQuick ViewCone Test Pipe Stoppers PULK
Cone pipe stoppers have in comparison with classical pipe stoppers different construction, but their use is the same.
Read moreQuick View -
Read moreQuick ViewFlow Measurement System AFLO-RS
- Ready-assembled flow measurement system without changing physical structure of manhole
- Works in every kind of manhole, channel or dropping point
- Suitable for water, wastewater, treated water and all kinds of liquids
- Standard outputs 4-20mA, Pulse, Relays
- Optional datalogger and online monitoring
Read moreQuick View -
Read moreQuick ViewUltrasonic Transit Time Flowmeter AFLO-TT
AFLO-TT Ultrasonic Transit Time Flowmeter is ideal to measure flow rate of clear, non-aerated fluids in full pipes. Works best on fluids that have less than 2% particulate or gas bubbles
- User-Friendly Operating System
- Works from the Outside of Common Pipe Materials
- Works with Wide Range of Liquids
- Wide Measuring Ranges Up to DN6000
- Easy and Fast Mounting
Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter / Calorimeter TFM2100-NG
Ultrasonic Flowmeter / Calorimeter TFM2100-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe. This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.Clamp-on sensors: it is not necessary to stop the flow to install them; Wetted sensors.
Read moreQuick View -
Read moreQuick ViewElectromagnetic Flowmeter AFLO-MAG
- Measured Media Conductive fluids
- Accuracy ±0.5%FS
- Electrical Conductivity ≥ 5 S / cm
- Ambient Temperature – 20 … 60 °C
- Display Graphic LCD
- Protection IP65 / IP67
Read moreQuick View -
Read moreQuick ViewOver Gear Flow Meter
- Accuracy: 0.5%, 0.2%
- Line size: 10~200mm
- Capability of measuring high-temperature and high-viscosity liquid
- Small pressure loss
- Simple installation
Read moreQuick View -
Read moreQuick ViewN-Serie Mass Flowmeters
Series N Mass Flow Sensor and IPT200 / DPT100 transmitter are paired to constitute series N flow meter with accuracy in 0.2% or 0.15%.
Read moreQuick View -
Read moreQuick ViewP – Serie Mass Flowmeters
P – Series Flow Meter consists of Series P Mass Flow Sensor and DPT Transmitter. The main features are as follows;
- Applied to Liquids, Gases, Grout Mass Flow
- Pipe sizes: DN10 – DN150
- Flow Measuring Accuracy: ±0.1%
- Density Measuring Accuracy: ±0.001g/cm2
- Process Temperature Limits: -40°C…+200°C
Read moreQuick View -
Read moreQuick ViewThermal Mass Flow Switch 7000NH – 7200NH
Switch contact closure: 5 amp at 5 VDC & 115VAC
Trip point accuracy: ± 1% of set point
Fluid temperature range: -40° to 65°C
Pressure rating, maximum: 500 PSI Std., > 500 PSI, special
Input power requirement: 24 VDC @ 250 mA max., 230 VAC 50/50 Hz optional
Flow Transmitter enclosure: IP66, 125 x 125 x 100 mm ABS plastic with polycarbonate cover
Wetted materials: All 316 SS (ceramic, glass, & epoxy optional)Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter/Calorimeter TFM3100 – F1
The Transit Time Flow Meter TFM3100 measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.High accuracy measuring: Linearity: better than 0.5% Repeatability: better than 0.2%, Accuracy: better than ± 1%Wide measuring range: Several types of transducers to be selected, measuring pipe sizes from DN15mm to DN6000mm with four different types of sensors + PT100 ohm when it works as heat meter.Italian or English menu: The different versions of TTFM100/2009 NEW GENERATION can support Italian or English display, easy to operate, in the near future other languages will be implemented.Power supply: 8….36 VDC or 10….30VACEngineering Units: Flow: Imperial and metric – Calories: BTU; GJ; KW; KCalDimensions / Protection Grade: 90 90 36mm / IP20Set-Up: By integrated keypadOutput: Relay OCT/4-20mA/RS485Protocol: M-BUS, MODBUSRead moreQuick View
+90 505 057 73 00 |info@debikontrol.com
