-
Read moreQuick View
Smart Pressure Transmitter PCE-28.Smart
- Measuring range: min. 0 … 5 mbar; max. 0… 1000 bar
- Output signal: 4…20 mA + protocol HART
- Accuracy: 0,1% (0,075%)
- Marine certificate – DNV, BV
Read moreQuick View -
Read moreQuick View
Smart Differential Pressure Transmmitter PRE-28.SMART
4…20 mA output signal + HART protocol
Intrinsic safety certificate (ATEX, IECEx)
Static pressure limit up to 420 bar
Accuracy 0,1%
Gold plated diaphragms (Au)
Wetted parts material Hastelloy C276
Marine certificate DNV, BVRead moreQuick View -
Read moreQuick View
Threaded seals with flush diaphragm and radiator S-Rc
S-Rc diaphragm seals are applicable to measurement of hot, viscous, solidifying or contaminated liquids, in any cases where an impulse line cannot be used.
Read moreQuick View -
Read moreQuick View
Digital Manometer AK601D
- Accuracy : ±0.05%F.S, ±0.1%F.S, ±0.2%F.S
- Temperature Compensating Range : (0~50)°C
- 9 engineering units : MPa, Pa, psi, kgf, bar, mbar, mmH2O, mmHg, kPa
- Connection : M20×1.5 male
- Communication : RS232
- Overall Dimensions : 130mm×94mm×40mm
- Display : 58mm×26mm
- Weight : 0.5kg
Read moreQuick View -
Read moreQuick View
Digital Test Manometer LDM70
LDM 70-E25: Accuracy ±0.125% f.s. / LDM 70-K50: Accuracy ± 0.25% f.s.
• Battery powered, rugged, rotatable housing (DS 70 mm)• 4.5-digit LC display (digit height 11 mm)• 6-digit additional display to show the selected pressure unit (height 7.5 mm)• Pressure unit switchable (PSI-bar-mbar-mWs-inHg-cmHg-mmHg-kPa-MPa)• Easy configuration via three push buttons• Ingress protection IP 65• Ranges from 0/1.45 psi to 0/8700 psi ( 0/100 mbar to 0/600 bar)• MIN and MAX value storageRead moreQuick View -
Read moreQuick View
Diaphragm Manometers
Case diameters 100 and 160 mm.Pressure Ranges 0/25 mbar to 0/25 bar.With threated or flanged connection.Standard or all stainless steel construction.Read moreQuick View -
Read moreQuick View
Differential – Pressure Manometers
Measuring of differential pressure for neutral, gaseous media, e.g. in Environmental Industries, Process engineering, Filter control etc.
Read moreQuick View -
Read moreQuick View
Contact Type Manometers
For application on severe working conditions, such as rapid and frequent pressure change, vibration and pulsation, this pressure gauge is manufactured with the case liquid filled. Contact Type Manometers also available with inductive contacs intrinsecally safe.
Read moreQuick View -
Read moreQuick View
Laboratory Test Manometers
These instruments have been designed for use as in laboratories, instrument testing or recalibration facilities or in applications where accuracy and repeatability are of prime importance.
Read moreQuick View -
Read moreQuick View
Capsule Manometers
Capsule Manometers are suitable for all gaseous media that will not obstruct the pressure system.
Read moreQuick View -
Read moreQuick View
Sanitary Diaphragm Seal S-Sanit
The both S-DIN and S-Clamp types of sanitary diaphragm seals can be used under aseptic conditions. They are typically applied to measure the pressure of media in the food and pharmaceutical industries.
Read moreQuick View -
Read moreQuick View
Mechanical Pressure Switch 03
Industrial pressure switches in weather-proof IP 55 construction, with an exceptionally long wor
Read moreQuick View