Ultra 5
Non-Contacting Level and Pump Control and Flow Measurement
- 5 control relays
- Measurement range 125 mm to 40 m (5 in to 131 ft)
- Optional 4-20mA input
- Pre-programmed tank shapes
- Power run-on
- Pump Exercising
- Start point variation | Storm Control | Aeration control | Flush valve Control | Differential level control
- Description
- Reviews (0)
- Specifications
- Brochure
- User’s Guide
Product Description
Ultra 5 provides flexible and reliable non-contacting ultrasonic level and volume measurement, advanced pump control, and measures open channel flow, with different mounting options available to suit the application. The Ultra 5 features the Ultra Wizard, an onboard, menu-driven software tool that allows the user to quickly and simply set up an Ultra 5 unit for a specific application.
Using a ‘Quick Setup’ menu, specific to the application, it allows parameters such as empty and full distances and alarm/control relay settings to be entered. The Ultra Datalogger provides all wall mounted Ultra Controllers with data logging functionality, recording a wealth of information onto the supplied 8 GB Micro SD card, enabling the user to log data for the lifetime of the product.
Be the first to review “Ultra 5”
| General Specifications | |
|---|---|
| Spec: | Description: |
| Transducer Cable Extensions | 2-core screened |
| Maximum Separation | 1,000 m (3,280 ft) |
| Operating Temperature (Electronics) | -20 °C to +50 °C (-4 °F to +120 °F) |
| Accuracy and Repeatability | 0.25% of the measured range or 6 mm (0.24 in) (whichever is greater) |
| Resolution | 0.1% of the measured range or 2 mm (0.079 in) (whichever is greater) |
| Min. and Max. Range | 0 m - 40 m (0 ft - 131 ft). Dependent on the sensor used. Ability to measure 50 m (164 ft) with dB50 when modified. |
| Analog Output | Isolated (floating) output (to 150 V) of 4-20mA or 0-20mA into 500 Ω (user programmable and adjustable) 0.1% resolution |
| Digital Output | Full Duplex RS232 |
| Volt-free Contacts, Number and Rating | 5 form “C” (SPDT) rated at 5 A at 240 V AC |
| Display | 6 digits plus 12 character text, plus bar graph with direction indicators, remote communicator identifier, and program/run/test mode indicators |
| Options | |
|---|---|
| Option: | Description: |
| Mounting Options | Wall Mount, Fascia Mount, Rack Mount, Panel Mount |
| Data Logger | SD Card data logger |
| Communications | RS485 Modbus & Data logging option Profibus & Data logging Option V1 |
Approvals:
- CE Approval
- Flammable Atmosphere Approval
- Up to IP65
ultra 5 Brochure
Ultra 5 Data Sheet
Ultra 5 User's Guide
Related Products
-
Read moreQuick ViewDoppler Flow Switch DFS 5.1
- Flow Control from the Outside of Metal or Plastic Pipes
- 5 amp DPDT Control Relay
- Adjustable ON/OFF Set-Points
- Hi or Lo Flow Alarm Mode
- Adjustable Time Delay
- Relay Status LED
- Flow Rate LED bargraph
Read moreQuick View -
Read moreQuick ViewUltrasonic Transit Time Flowmeter AFLO-TT
AFLO-TT Ultrasonic Transit Time Flowmeter is ideal to measure flow rate of clear, non-aerated fluids in full pipes. Works best on fluids that have less than 2% particulate or gas bubbles
- User-Friendly Operating System
- Works from the Outside of Common Pipe Materials
- Works with Wide Range of Liquids
- Wide Measuring Ranges Up to DN6000
- Easy and Fast Mounting
Read moreQuick View -
Read moreQuick ViewPulsarGuard Series
- Non-invasive and maintenance-free
- Simple bolt-on installation
- Low cost
- No moving parts and vibration resistant
- IP68 Stainless Steel housing
- Highly reliable in low or high temperature
- ATEX Flammable atmosphere approved (2011 option only)
Read moreQuick View -
Read moreQuick ViewFlow Monitor Fixed Installation For Pipe Flow Monitoring
- Provides power for FlowPulse 22-28 V DC and Universal AC 85-264 V
- Display for flow/velocity from a single FlowPulse controller
- Set up of FlowPulse sensor
- Two programmable relays for control and alarm
- Daily system/resettable totalizers
- Logging, set up, and download via optional Log Software
Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter TFM5100-NG
The Transit Time Flow Meter TFM5100-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter TTFM100-F1-NG
The Transit Time Flow Meter TTFM100-F1-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe.This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.•Clamp-on sensors: it is not necessary to stop the flow to install them; Wetted sensors.•AC and DC supply: 85..264 VAC and 24 VDC.•The time difference during the measuring process could be 0.2 ns.•Analog (4-20 ma), pulses (relays), frequence, Pulse (OCT) and RS485 (M-BUS, MODBUS )outputs.•All the measures could be driven to the RS485 in order to save data into a PC remotely transmitted by telemetry.Read moreQuick View -
Read moreQuick ViewUltrasonic Slurry Flowmeter SFM 6.1
- Optimized for Slurries
- Easy, Intuitive Set-Up
- 5 Button Menu System
- Isolated 4-20mA Output
- Up to 6 Control Relays
- Optional Built In Data Logger
Read moreQuick View -
Read moreQuick ViewTransit Time Flow Meter, TTFM 1.0
- Non-Contacting Clamp-on Ultrasonic Transducers
- Works on Metal and Plastic Pipes
- Large Backlit Flow Rate Display and Totalizer
- Isolated 4-20mA Output
- Built-in 5-Key Calibrator
- 2 Programmable Control Relays
- Optional 2 Million Point Data Logger
Read moreQuick View -
Read moreQuick ViewFlanged Ultrasonic Water Meter TFM6000-WF
Sandwich Insertion Ultrasonic Water Meter is a new style water meter specially designed for agricultural irrigation, Garden Management and water resource supervision.
Advantages of this water meter ;
Low cost, high accuracy, low power consumption, stability and reliability.
1 inch thickness of the meter helps to save installation space, and parts to achieve IP 68, enable the water works in any severe environment .
Due to unique design, there will be no pressure loss and different water medium will have no influence on measurement
Analog, Digital outputs and RS485
Read moreQuick View -
Read moreQuick ViewUltrasonic Flowmeter / Calorimeter TFM2100-NG
Ultrasonic Flowmeter / Calorimeter TFM2100-NG measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe. This flow meter is mostly used to measure the flow rate of homogeneous fluids, also with a quite high percentage of suspended solids.Clamp-on sensors: it is not necessary to stop the flow to install them; Wetted sensors.
Read moreQuick View
Reviews
There are no reviews yet.