LSP 1000-BM & LSP 1600-BM, Pressure Comparison Pumps
- Description
- Application Areas
- Reviews (0)
- Specifications
- Brochure
- User’s Guide
Product Description
Pressure Comparison Test Pumps are used to generate pressures for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements.
Pressure Comparison Test Pumps are used to generate pressures for checking, adjusting and calibrating mechanical and electronic pressure measuring instruments by comparative measurements.
Be the first to review “LSP 1000-BM & LSP 1600-BM, Pressure Comparison Pumps”
LSP-1000-BM LSP-1600-BM
Pressure Range: 0...1000 bar / 0...14500 psi 0...1600 bar / 0...23200 psi
Medium: oil (or destilled water)
Pressure connections: 2 x 1/2" BSP female, rotating, with O-ring
Distance of the pressure ports: 300 mm
Liquid reservoir: 250 cm³
Piston diameter: 8 mm
Swept volume per revolution: appr. 0.1 cm³
Overall swept volume: appr. 3.9 cm³
Required moment at 250 bar 2.0 Nm
500 bar 4.0 Nm
1000 bar 8.0 Nm
Material Cylinder brass
Piston stainless steel
Tubing stainless steel 1.4404, 6 x 2 mm
Back flange aluminium
Sealing gaskets FKM, NBR
Dimensions: W 400 x D 375 x H 265 mm
Weight: 20 kg
LSP 1000-BM & LSP 1600-BM, PRESSURE COMPARISON PUMPS BROCHURE
LSP 1000-BM & LSP 1600-BM, PRESSURE COMPARISON PUMPS USER GUIDE
Related Products
-
Read moreQuick ViewDry Block Temperature Calibrator PULSAR-35CU
Dry Block Temperature Calibrator PULSAR-35CUfor mobile or stationary usemicro processor operated (PID)ramp function, thermostat testRead moreQuick View -
Read moreQuick ViewElectronic Pressure Calibrator LPC 200
Electronic Pressure Calibrator LPC 200, changeable pressure sensors
- Very simple operation, easily-read display (backlighting selectable)
- Changeable reference sensors (plug & play) this means, up to 10 pressure ranges with one instrument
- Ranges from 0…5.8 psi (400 mbar) up to 0…87000 psi (6000 bar)(also vacuum-, compound- and absolute pressure ranges)
- Accuracy up to 1000 bar: ±0.025% f.s.; up to 6000 bar: ±0.1% f.s.
- Logging function, pressure rate, min-/max value, Bargraph, Tare
- Issue calibration certificates with optional PC-Windows®-software LPC-Cal
- Pressure calibration kit’s, complete with calibration hand pumps as portable pressure source
- Chargeable Lithium-Ion battery, incl. Charger, USB-interface
- Switchable pressure unit PSI, bar, mbar, kPa, mmHg, in Hg.
Read moreQuick View -
Read moreQuick ViewDifferential Pressure Deadweight Tester CPB5000-DP
Differential Pressure Deadweight Tester ( Pressure Balance) CPB5000-DPReal differential pressure calibrationPneumatic ranges: up to 100 bar / 1500 psiHydraulic ranges: up to 1000 bar / 15000 psiAccuracy (total uncertainty): up to ±0.008% of measured valueTester with two piston-/cylinder-units and two weight setsOne spindle pump for generating the static line pressure, another one for generating the differential pressureOptions: DKD certification, IKM intelligent calibration module for automatic calculation of corrections etcRead moreQuick View -
Read moreQuick ViewDry Block Temperature Calibrator PYROS-125
- Temperature range (at +20°C ambient temperature): -24°C…+125°C
- For 230 VAC and 115 VAC autorange (PYROS-125) resp. switchable
- For mobile use on site and stationary use
- Thermostat test facility
Read moreQuick View -
Read moreQuick ViewIntelligent Calibration Module IKM
IKM Intelligent Calibration Module for Deadweight Tester(Pressure Balances)Used in combination with a deadweight tester (pressure balance) to determine the required mass loadsConversion into all common pressure unitsConsideration of the local gravity on-siteConsiders all critical ambient parameters to improve the measuring accuracyEasy calibration of pressure transmitters through integrated voltage supply and multimeter function (optional)Self-sustaining system, PC-independentRetro-fitting possible, for all deadweight tester (pressur balances) available on the marketRead moreQuick View -
Read moreQuick ViewDry Block Temperature Calibrator PYROS-650
- Temperature range (at +20°C ambient temperature): +35°C…+650°C
- For 230 VAC and 115 VAC autorange (PYROS-125) resp. switchable
- For mobile use on site and stationary use
- Thermostat test facility
Read moreQuick View -
Read moreQuick ViewDry Block Temperature Calibrator PULSAR-80CU
Dry block Temperature Calibrator Type PULSAR-80CUTemperature range: ambient temperature up to +550°CFor mobile and stationary useMicro processor operated, ramp function, thermostat testsRead moreQuick View -
Read moreQuick ViewElectronic Pressure Calibrator LEC 200
Multi-Function Calibrator LEC 200
- Highest accuracy in class up to ±0.015% of reading.
- Source / Read thermocouples (13), RTDs (19; ohms, current, voltage, frequency and pulse trains (only source).
- Isolated mA / V read-back circuit for complete transmitter calibration.
- Programming of setpoints to speed up calibration tasks.
- Entry of custom RTD coefficients.
Read moreQuick View -
Read moreQuick ViewDeadweight Tester LDW 1000
- Deadweight Tester LDW 1000
- Pressure Balance – Primary Standard for Pressure
- Ranges 0.2…60 bar, 1…250 bar, 2…600 bar, 2…1000 bar 2.9…1,000 psi, 14.5…5,000 psi, 29…10,000 psi, 29…15,000 psi
- Accuracy (total uncertainty of measurement) ±0.025% of measured value
- Self-sustaining complete system, also suitable for on-site measurements / calibrations
- Including Certificate of Calibration, traceable to National Standard (optional: DKD certification)
Read moreQuick View -
Read moreQuick ViewElectronic Pressure Calibrator DFP
- Accuracy: ±0.1% v.E., Pressure ranges up to 2000 bar
- 1 year autonomy without recharging (battery operated)
- Pressure unit “bar”, conversion to Force
- PEAK function (positive and negative)
- Digital Filter (programmable)
- Pressure connection: 1/2″ BSP male
- Clear easy to read LCD display with large number
Read moreQuick View
Reviews
There are no reviews yet.